logo01.gif (2289 bytes)

ZM-80D HP
zm80d_hp_f_p.jpg (33420 bytes) zm80d_hp_b_p.jpg (20785 bytes)
zm80d_hp_s_p.jpg (52270 bytes) zm80d_hp_c_p.jpg (40628 bytes)
Features:
  1. This product was designed to optimize heat dissipation for excellent cooling performance.
  2. Dual heatpipes increase heat transfer speed and enhance the cooling efficiency.
  3. The fanless design ensures complete noiselessness and maintenance-free operation.
  4. RAM heatsinks for cooling the VGA RAM.
  5. Compatibility with virtually all types of VGA cards allows reinstallation when upgrading the VGA card. (Incompatible with VGA cards that do not have original heatsink holes measuring 3mm in diameter, or VGA cards on which the ZM80D-HP interferes with the card's components.)
  6. An Optional Fan (ZM-OP1, sold separately) can be attached to the heatsink directly without using a separate bracket.
Exploded View:

ZM80D_drawing01.gif (22055 bytes)
Specifications:
  1. Weight: 350 g
  2. Heatpipe: Gold plated copper tube
  3. Dissipation material: Anodized Aluminum
  4. Heat Dissipation Surface Area: 1350 cm2
  5. VGA RAM Heatsink material: Anodized Aluminum
  6. VGA RAM Heatsink weigh:
    Frontside : 2.9 g (EA)
    Backside : 1.2 g (EA)
Compatible Video Cards:
This product can be used with any video cards that have heatsink mounting holes.
Note 1) If you are using an nVIDIA GeForce FX5800, an ATI Radeon 9800 Pro, a Matrox Parhelia, or a more advanced model, an Optional Fan (ZM-OP1, sold separately) must be installed.
Note 2) This product is not installable on an nVidia GeForce 6800 GT, 6800 Ultra because they do not have 3mm holes around the GPU.
Note 3) Zalman does not recommend VGA card overclocking. Zalman is not responsible for any damage from VGA card overclocking.
Note 4) Since this product weighs 350 g, always firmly fasten the VGA card onto the case with a screw. Special care should be taken while the computer is being moved. Zalman is not responsible for any damage arising while moving the computer.
Note 5) To enhance the performance of this product, the use of a fan on the rear panel of the system's case is recommended.
Note 6) After installing this product on a VGA card (Video Graphics Card), the PCI slot adjacent to the AGP slot will be unusable.
Cautions on using ZM80D-HP:
The computer should be placed according to the following diagrams in order for the product to function properly.
If it is set up in such a way that the video card's GPU faces upwards, then this product cannot be used. Also, if you attempt to adjust the positioning of the computer by flipping it in a reverse direction, the product will not function properly either, so you should place your computer case in its normal position.
ZM80C_drawing5.gif (9534 bytes)

1) Good (AGP slot is under the CPU)
2) Good (AGP slot is under the CPU)
3) Bad (AGP slot is over the CPU)
4) Good (AGP slot is on the right side of the CPU)

To Enhance the Performance

ZM80D_drawing02.gif (6316 bytes)
You can expect a satisfactory cooling performance with ZM80D-HP alone, but this product is also designed to accommodate a noiseless fan (ZM-OP1) on its heatsink.
Therefore, should you want even more stable performance, you can attach the noiseless fan (ZM-OP1) as needed.

ZM80C_drawing7.gif (3599 bytes)
When installing a video card that has this product installed into a computer system, open up the PCI slot cover under the AGP slot to lower the GPU(VPU) temperature by around 4 to 5 degrees Celsius.
Conditions for Installing ZM80C-HP:
Video Cards with the Heatsink Mounting Holes

ZM80C_drawing2.gif (1426 bytes)
Installable on video cards with the heatsink mounting holes.
Interference with the Motherboard Components and Other Peripherals

ZM80C_drawing3.gif (4344 bytes)
If the northbridge heatsink that is 25mm or taller in height (measured from the motherboard's surface) is away from the AGP slot in the direction of the CPU by 5.5mm or farther, this product can be installed.

ZM80C_drawing4.gif (4085 bytes)
If CNPS7000 (Zalman's noiseless CPU cooler) is also to be installed, the CPU retention guide needs to be 35mm or farther away from the AGP slot for this product to be installable.
Components:

zm80d_hp_y_p.jpg (48799 bytes)
  1. Frontside Heatsink 1EA
  2. Backside Heatsink 1EA
  3. Heatpipe Cover 1EA
  4. Frontside Heatsink Base 1 Set
  5. Backside Heatsink Base 1 Set
  6. VGA RAM Heatsinks 1 Set
  7. Heatpipe A 1EA
  8. Heatpipe B 1EA
  9. Screw Driver 1EA
  10. Assembly Parts 1 Set
  11. Spare Parts 1 Set
    Optional Components :
    ZM-OP1 (ZM80D-HP Optional Fan)
    ZM-RHS1 (VGA RAM Heatsinks), Thermal Tape