After PC shuts down, cooling fans keep running for at least 2 minutes to effectively
cool down parts and hardwares inside PSU and PC cases. Thus, ensure longer product life
time of power supply and hardwares inside PC case.
Separate 12V rails:
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean
current to noise-sensitive devices, such as: CPU, add-on cards.Meet UL 240VA safety
ATX 12V V1.3 compatible:
Support latest P4 and Athlon 64 platforms. For P4 platforms use 865 (Springdale) & 875
(Canterwood) chipsets and even new P4 Prescott and AMD Athlon 64 or later CPU.
Connect your system to the faster S-ATA interface for better performance.
Manual and automatic fan speed control:
8cm & 9cm fans automatically controlled by thermostat plus rheostat control over 8cm
fan. Enable users to keep the balance between cooling effect and acoustic noise.
Extra Power connector:
Extra 4-pin power connector provides high-end graphic card with stable current.
OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well-guarded from any dangers.
Maximize safety for your hardware and valuable data.
Effectively reduces electro-magnetic interference that might affect MB and CPU from normal
operation. (Valid for models with 370W and higher total power)
The best cooling method for PC system, and is strongly suggested by AMD.
Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and
smooth mechanical design of fan guards.
FM & FC functions:
RPM signal of 8cm exhaust fan is provided; EG xxx AX-VE SFCA/FCA models allow MB to on/off
control 8cm exhaust fan.