Arctic Alumina
Premium Ceramic Thermal Adhesive

Arctic Silver Thermal Adhesive IS NOT intended to be used between a CPU and the CPU heatsink. On a CPU, only use Arctic Silver 3 Thermal Compound.

alumina_adhesive_med.jpg (90705 bytes)

Characteristics:

  • Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.
  • Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capacitive.

A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams of adhesive (2.5 grams each of parts A and B) and a plastic reusable mixing wand. (Approximately 3cc total adhesive.)

Although lighter per set than Arctic Silver Adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area.
CAUTION! 
Arctic Alumina Thermal Adhesive is a permanent adhesive.
Components you attach with Arctic Alumina Thermal Adhesive will stay attached forever.